Most people ask how much it costs to make the handboard. In this case, we need to be clear that the handboard model is a customized OEM product, and we need to provide corresponding design drawings, and we need to know the specific size of the handboard made by the customer. After knowing the relevant data, we need to refer to other factors to calculate the price of the handboard. The quotation involves the demand of the whole product. The same For products that look similar, the price of one more process is different. The quotation of the hand board model is based on the analysis of the size of the product according to the 3D diagram, as well as the required process and processing time. Of course, different handboard processing technology price reference factors are also different.

3D打印的主要是按照材料的重量來計算的加上其他的表面處理工藝費用，如果你要做的手板適合3d打印，我們會根據您的3d圖紙計算出您的手板所需要的原材料的重量（一般都是以g為單位），然后再乘以每克原材料的，原材料的也是有高有低，材料也是分等級的，是看3D印機的適用和客戶的要求，材料好點的自然就貴。

The price of 3D printing is mainly calculated according to the weight of materials plus other surface treatment process costs. If the handboard you want to make is suitable for 3D printing, we will calculate the weight of raw materials required for your handboard according to your 3D drawings (generally in G), and then multiply by the price of raw materials per gram. The price of raw materials is also high or low, and the material is also high or low Grade, is to see the application of 3D printing machine and customer requirements, the price of better materials is naturally expensive.

如果你做的是cnc手板，要考慮你所需要的手板表面處理工藝有哪些要求，所用到的工藝越多，自然也越高，其次，要看手板的尺寸與復雜度，這兩個因素跟手板的成正比，尺寸越大，用料也多，復雜程度越高，難度越大，越費時間，自然也高；是看精度要求，若精度要求非常高的（比如0.01mm），加工精度高的的設備和技術以及人工要求也跟著增高，制作成本增加了，所以也會有變化。

If you are making CNC handboards, first of all, you need to consider the requirements of the surface treatment process of the handboards. The more processes you use, the higher the price is naturally. Second, you need to see the size and complexity of the handboards. These two factors are directly proportional to the price of the handboards. The larger the size, the more materials you use, the higher the complexity, the more difficult it is, and the more time you spend, the higher the price is naturally The next step is to look at the accuracy requirements. If the accuracy requirements are very high (for example, 0.01mm), the equipment, technology and labor requirements with high processing accuracy will also increase, and the production cost will increase, so the price will also change.

如果是要做批量的手板需要真空復模這種工藝做的話，那么手板的就需要從手板模型的、硅膠模具的、每個復模手板的這三個相加才能得出準確。這是因為由于真空復模事先需要用CNC或者3D打印制作出一個手板模型，然后再根據手板模型制作一個硅膠模具，再通過硅膠模具來進行復制產品。

If it is necessary to make a batch of handboards by the process of vacuum re molding, then the price of handboards can be obtained by adding the price of handboard model, the price of silica gel mold and the price of each re molding handboard. This is because the vacuum mold needs to be printed by CNC or 3D in advance to make a handboard model, and then a silica gel mold is made according to the handboard model, and then the products are copied by silica gel mold.