手板模型是一種用3d打印技術制作出來的模型，如今使用是非常廣泛的。比如日常生活中常見的電器手板、對講門鈴等通訊商品手板等就是手板模型產品。在使用濟南手板模型的過程中是一定要注意做好維護保養的，這樣才能延長壽命，更好的進行使用，下面這些保養方法可以參考一下。

Prototype model is a kind of model made by 3D printing technology, which is widely used nowadays. For example, the common electrical appliances and intercom doorbells in daily life are the prototype products of the prototype. In the process of using the Jinan prototype, you must pay attention to the maintenance, so as to prolong the service life and better use. The following maintenance methods can be referred to.

1、不能夠直接接觸明火或者電的，因為手板模型抗高溫性能很一般，遇到明火處著電的話容易受損。

1. It is not allowed to directly contact with open fire or electricity, because the high-temperature resistance of the prototype model is very general, and it is easy to be damaged in case of electricity at the open fire.

2、要遠離食鹽、鹽酸、苦鹵等物質，因為鍍層在這些物質中是會被腐蝕。還有手板模型不能夠和84液、漂白粉等物質接觸。

2. Keep away from salt, hydrochloric acid, bittern and other substances, because the coating will be corroded in these substances. Also, the hand model cannot be contacted with 84 disinfectant, bleach and other substances.

3、要經常使用熱水清洗手板模型，但是不能夠用帶腐蝕性的清潔劑去清洗。

3. Hot water should be often used to clean the hand model, but not enough corrosive detergent.

4、要放置在的地方，不能夠放在有媒體、煤球爐和煤煙熏烤的地方。否則鍍層受到一氧化碳的影響會出現黑色網狀裂紋或者銹蝕。

4. It should be placed in a safe place, not in a place with media, coal ball furnace and coal smoke. Otherwise, the coating will be affected by carbon monoxide and black network cracks or rust will appear.

5、不要用鋒利的器皿去接觸，也不能夠用重物壓，否則會讓手板模型出現變形或者受損的情況。

5. Do not use sharp utensils to touch or press with heavy objects, otherwise the model will be deformed or damaged.

6、定期擦拭手板模型，可以用軟布蘸上清水擦拭。一定不可使用機油或者類似的溶液擦拭，否則手板模型鍍層很容易被毀掉。

6. Wipe the hand model regularly. You can use a soft cloth dipped in water to wipe. Do not use engine oil or similar solution to wipe, otherwise the plating of the prototype model will be easily destroyed.

7、要存放在干凈的陰涼的盒子或者柜子里面，避免把手板模型放在揚塵大的地方，因為手板模型是比較容易吸塵的。

7. It should be stored in a clean and cool box or cabinet, and avoid placing the hand model in a place with large dust, because the hand model is easy to dust.

總之，手板模型是一定要注意維護保養的，畢竟制作出來大家都希望它能夠有良好的使用效果，注意維護保養才能夠讓手板模型維持良好狀態，同時也是能夠延長使用壽命的。以上這幾點保養方法是非常有效的，大家按要求去做就能夠見到效果。相關注意事項就來我們網站http://www.sojiwang.com咨詢了解吧。

In short, we must pay attention to the maintenance of the prototype. After all, we all hope that it can have a good use effect. Only by paying attention to the maintenance can the prototype maintain a good state and prolong its service life. The above maintenance methods are very effective. You can see the effect if you do as required. Relevant precautions come to our website http://www.sojiwang.com Consult and understand.